Diy Electronics | Banana Pi Bpi-M2 Pro Single-Board Computer

Description

Coolbe: The seller provides assurances that they comply with all applicable laws in the region, including only selling products that comply with Coolbe’s policies and EU product safety and compliance laws.
Products include:
1pcs BPI-M2 Pro board
Product
Size:BPI-M2 Pro:length 10.5cm wide7.8cm high 2cm
=========================
BPI-M2 Pro Introduction——————————–Banana Pi BPI-M2 Pro is the next generation single board computer from Banana Pi in 2021. It is powered by Amlogic S905X3 quad-core Cortex-A55 (2.0 XXGHz) processor.Onboard 2GB LPDDR4 memory and 16GB EMMC storage, and supports 2 USB 3.0 interface, a gigabit network port. RT8821CU wifi&BT onboard. 1 HDMI output
BPI-M2 Pro same size as Banana Pi BPI-M2+ , and interface is also same .so can use BPI-M2+ case.
===================================================================
Key Features——————————–Amlogic S905X3 quad core Cortex-A55 (2.0xxGHz)Mali-G31 GPU2GB LPDDR416GB eMMC flash2 USB 3.0RTL8821CU WiFi&BT 4.2 onboard1 GbE ethernetHDMI output
=====================================================================
Hardware spec———————————HardWare Specification of Banana pi BPI-M2 Pro
CPU Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz)GPU Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)Memory 2 GB LPDDR4Storage MicroSD slot with support for up to 256GB expansion and 16G eMMC flash with support for up to 64GBNetwork 10/100/1000 Mbit/s EthernetWifi&BTDual-band 802.11 b/g/n/ac WiFi 5 1×1 and Bluetooth 4.2 via Realtek RTL8821CUVideo Output(s) 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID)Audio Output(s) 1 x HDMI digital outputUSB ports 2x USB 3.0 host ports, 1x micro USB OTG portGPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWMSwitches Reset, Power and U-bootLED Power Status and Activity statusPower Source 5 volt @3A via DC portSize & Weight 65mm×65mm, 58gOS Android and Linux